Plane Finder is a United Kingdom-based real-time flight tracking service launched in 2009, that is able to show flight data globally. The data available includes flight numbers, how fast an aircraft is moving, its elevation and destination of travel. Several variants of the service are available as mobile apps including free, premium 3D and augmented reality versions. The flight tracking map and database can be accessed by web browsers. Plane Finder allows registered users to share their ADS-B and MLAT data via the Plane Finder ADS-B Client, available for macOS, Windows and Linux. Plane Finder supports VFR charts from NATS, and was the first major flight tracking app to introduce a replay feature, allowing users to replay flights dating back to 2011. == Flight tracking == Plane Finder collects data from its own global network of receivers, using the following sources. === Automatic dependent surveillance-broadcast (ADS-B) === A network of automatic dependent surveillance-broadcast (ADS-B) receivers gathers aircraft data such as callsign, position and speed. Plane Finder serves to supplement this data with additional information, including aircraft registration/tail number, departure airport, destination, artwork, and photographs. Plane Finder users can apply for an ADS-B receiver in exchange for their flight data. === Multilateration (MLAT) === To deliver aircraft position data where ADS-B is unavailable, Plane Finder uses multilateration (MLAT). Using three or more receivers running Plane Finder client software, monitoring the aircraft simultaneously, the aircraft’s position is calculated using receiver location and accurate timestamps. While European airspace is widely covered, only some parts of North American airspace are covered. === Federal Aviation Administration (FAA) feed === ADS-B is prevalent across Europe and Australia, but not in North America. Where MLAT or ADS-B data is unavailable, a feed from the Federal Aviation Administration provides flight information. The FAA feed covers United States and Canadian airspace, including bordering areas of the Atlantic and Pacific Oceans. === FLARM feed === Plane Finder collects data from a centralised FLARM feed, for monitoring small aircraft and gliders. == Flight data source == The Plane Finder website and database is widely used as an information source to support articles in the media. The Independent used Plane Finder flight tracking to demonstrate to readers the flight path of flight MT2706, which turned back as a result of last minute Egyptian government flight restrictions on 6 November 2015. The Independent also used Plane Finder information to demonstrate a timeline of the speed/altitude of flight 7K 9268, a Russian plane which crashed on 31 October 2015. The BBC cited Plane Finder in regard to the point at which at British Airways flight turned back to Heathrow Airport to make an emergency landing after smoke was seen coming from its engines. Plane Finder data has also been used to create original imagery for the media, such as the Washington Post, which used Plane Finder as a source to show flight patterns immediately after the Brussels bombings in March 2016.
Butler in a Box
Butler in a Box was an early voice-controlled home automation device developed in 1983 by magician Gus Searcy and programmer Franz Kavan. The device allowed users to control various home electronics, such as lights and phones, using voice commands. It predated modern smart speakers and virtual assistants by several decades. == History == The idea for the Butler in a Box originated in 1983 when Searcy was asked by friends why he couldn't simply command lights to turn on and off if he could pull rabbits out of hats, given his background as a professional magician. Searcy partnered with former IBM programmer Kavan to develop the device, with their first prototype being named "Sidney". The Butler in a Box combined remote control technology with voice recognition to enable control of home devices. However, it faced challenges due to the technological limitations of the era and its high price point of nearly $1,500 (equivalent to around $3,700 in 2021). == Features and functionality == Users could activate the Butler in a Box by speaking a wake word, typically a traditional butler name, and the device would address the user as "boss". It was capable of performing tasks such as: Turning lights on and off, controlling individual zones if lights were connected to remote control modules Making and receiving phone calls Setting timers Pairing with sensors to function as a security alarm system However, the device required extensive voice training for each user, a time-consuming process compared to modern voice recognition. Additionally, settings and trained commands would be lost if power was out for over 3 hours due to the volatile memory technology used at the time. == Reception and legacy == While innovative for its time, the Butler in a Box did not achieve widespread commercial success due to its high price and the technical limitations of the 1980s. Nevertheless, it served as an important early step in the development of home automation and showcased the potential for voice-controlled technology to enhance accessibility and convenience in the home. Decades later, products like Amazon Alexa, Google Home, and Apple's Siri would make voice-controlled smart home devices commonplace and affordable, building on the groundwork laid by early attempts like the Butler in a Box.
Stewart Nelson
Stewart Nelson is an American mathematician and programmer from The Bronx who co-founded Systems Concepts. == Biography == From a young age, Nelson was tinkering with electronics, aided and abetted by his father who was a physicist that had become an engineer. Stewart attended Poughkeepsie High School, graduating in the spring of 1963. From his first few days of High School, Stewart displayed his talents for hacking the international telephone trunk lines, along with an uncanny skill for picking combination locks, although this was always done as innocent entertainment. He simply loved the challenge of seeing how quickly he could accomplish this feat. His quirky sense of humor was always visible, as was his disdain for any rule that got in the way of his gaining knowledge. Stewart was an inspiration to the school's Tech-elec Club, as well as a ringleader in the founding of the school's pirate radio station. Nelson enrolled at MIT in 1963 and quickly became known for hooking up the AI Lab's PDP-1 (and later the PDP-6) to the telephone network, making him one of the first phreakers. Nelson later accomplished other feats like hard-wiring additional instructions into the PDP-1. Nelson was hired by Ed Fredkin's Information International Inc. at the urging of Marvin Minsky to work on PDP-7 programs at the MIT Computer Science and Artificial Intelligence Laboratory. Nelson was known as a brilliant software programmer. He was influential in LISP, the assembly instructions for the Digital Equipment Corporation PDP, and a number of other systems. The group of young hackers was known for working on systems after hours. One night, Nelson and others decided to rewire MIT's PDP-1 as a prank. Later, Margaret Hamilton tried to use the DEC-supplied DECAL assembler on the machine and it crashed repeatedly.
Danilo McGarry
Danilo McGarry (born 1985) is a British tech executive, writer, and speaker who has led AI initiatives in finance and healthcare. == Early life and education == Danilo McGarry was born in 1985. He received a Bachelor of Science (BSc) with honors in Business Management from the University of Bath. == Career == McGarry began his career in technology and financial services, with positions at companies including Motorola, JPMorgan Chase, and BNP Paribas. He later joined the Royal Bank of Canada (RBC) as an analyst and later became a director, where he led transformation initiatives involving robotic process automation (RPA) in the bank's capital markets operations. McGarry subsequently moved into leadership roles focused on AI. At Citigroup, he served as Head of Artificial Intelligence and Machine Learning, where he launched an AI-driven robotics and automation initiative. At UnitedHealth Group (UHG), he held a senior role in the company's automation program, which utilized a large fleet of software robots in its healthcare operations. In December 2019, McGarry was appointed Global Head of AI & Automation at Alter Domus, a multinational financial services firm. In this role, he established a new AI and automation department. He left the firm in late 2023 to establish his businesses. In 2025, the Chartered Institute of Personnel and Development (CIPD) appointed him as its strategic adviser on artificial intelligence.
User modeling
User modeling is the subdivision of human–computer interaction which describes the process of building up and modifying a conceptual understanding of the user. The main goal of user modeling is customization and adaptation of systems to the user's specific needs. The system needs to "say the 'right' thing at the 'right' time in the 'right' way". To do so it needs an internal representation of the user. Another common purpose is modeling specific kinds of users, including modeling of their skills and declarative knowledge, for use in automatic software-tests. User-models can thus serve as a cheaper alternative to user testing but should not replace user testing. == Background == A user model is the collection and categorization of personal data associated with a specific user. A user model is a (data) structure that is used to capture certain characteristics about an individual user, and a user profile is the actual representation in a given user model. The process of obtaining the user profile is called user modeling. Therefore, it is the basis for any adaptive changes to the system's behavior. Which data is included in the model depends on the purpose of the application. It can include personal information such as users' names and ages, their interests, their skills and knowledge, their goals and plans, their preferences and their dislikes or data about their behavior and their interactions with the system. There are different design patterns for user models, though often a mixture of them is used. Static user models Static user models are the most basic kinds of user models. Once the main data is gathered they are normally not changed again, they are static. Shifts in users' preferences are not registered and no learning algorithms are used to alter the model. Dynamic user models Dynamic user models allow a more up to date representation of users. Changes in their interests, their learning progress or interactions with the system are noticed and influence the user models. The models can thus be updated and take the current needs and goals of the users into account. Stereotype based user models Stereotype based user models are based on demographic statistics. Based on the gathered information users are classified into common stereotypes. The system then adapts to this stereotype. The application therefore can make assumptions about a user even though there might be no data about that specific area, because demographic studies have shown that other users in this stereotype have the same characteristics. Thus, stereotype based user models mainly rely on statistics and do not take into account that personal attributes might not match the stereotype. However, they allow predictions about a user even if there is rather little information about him or her. Highly adaptive user models Highly adaptive user models try to represent one particular user and therefore allow a very high adaptivity of the system. In contrast to stereotype based user models they do not rely on demographic statistics but aim to find a specific solution for each user. Although users can take great benefit from this high adaptivity, this kind of model needs to gather a lot of information first. == Data gathering == Information about users can be gathered in several ways. There are three main methods: Asking for specific facts while (first) interacting with the system Mostly this kind of data gathering is linked with the registration process. While registering users are asked for specific facts, their likes and dislikes and their needs. Often the given answers can be altered afterwards. Learning users' preferences by observing and interpreting their interactions with the system In this case users are not asked directly for their personal data and preferences, but this information is derived from their behavior while interacting with the system. The ways they choose to accomplish a tasks, the combination of things they takes interest in, these observations allow inferences about a specific user. The application dynamically learns from observing these interactions. Different machine learning algorithms may be used to accomplish this task. A hybrid approach which asks for explicit feedback and alters the user model by adaptive learning This approach is a mixture of the ones above. Users have to answer specific questions and give explicit feedback. Furthermore, their interactions with the system are observed and the derived information are used to automatically adjust the user models. Though the first method is a good way to quickly collect main data it lacks the ability to automatically adapt to shifts in users' interests. It depends on the users' readiness to give information and it is unlikely that they are going to edit their answers once the registration process is finished. Therefore, there is a high likelihood that the user models are not up to date. However, this first method allows the users to have full control over the collected data about them. It is their decision which information they are willing to provide. This possibility is missing in the second method. Adaptive changes in a system that learns users' preferences and needs only by interpreting their behavior might appear a bit opaque to the users, because they cannot fully understand and reconstruct why the system behaves the way it does. Moreover, the system is forced to collect a certain amount of data before it is able to predict the users' needs with the required accuracy. Therefore, it takes a certain learning time before a user can benefit from adaptive changes. However, afterwards these automatically adjusted user models allow a quite accurate adaptivity of the system. The hybrid approach tries to combine the advantages of both methods. Through collecting data by directly asking its users it gathers a first stock of information which can be used for adaptive changes. By learning from the users' interactions it can adjust the user models and reach more accuracy. Yet, the designer of the system has to decide, which of these information should have which amount of influence and what to do with learned data that contradicts some of the information given by a user. == System adaptation == Once a system has gathered information about a user it can evaluate that data by preset analytical algorithm and then start to adapt to the user's needs. These adaptations may concern every aspect of the system's behavior and depend on the system's purpose. Information and functions can be presented according to the user's interests, knowledge or goals by displaying only relevant features, hiding information the user does not need, making proposals what to do next and so on. One has to distinguish between adaptive and adaptable systems. In an adaptable system the user can manually change the system's appearance, behavior or functionality by actively selecting the corresponding options. Afterwards the system will stick to these choices. In an adaptive system a dynamic adaption to the user is automatically performed by the system itself, based on the built user model. Thus, an adaptive system needs ways to interpret information about the user in order to make these adaptations. One way to accomplish this task is implementing rule-based filtering. In this case a set of IF... THEN... rules is established that covers the knowledge base of the system. The IF-conditions can check for specific user-information and if they match the THEN-branch is performed which is responsible for the adaptive changes. Another approach is based on collaborative filtering. In this case information about a user is compared to that of other users of the same systems. Thus, if characteristics of the current user match those of another, the system can make assumptions about the current user by presuming that he or she is likely to have similar characteristics in areas where the model of the current user is lacking data. Based on these assumption the system then can perform adaptive changes. == Usages == Adaptive hypermedia: In an adaptive hypermedia system the displayed content and the offered hyperlinks are chosen on basis of users' specific characteristics, taking their goals, interests, knowledge and abilities into account. Thus, an adaptive hypermedia system aims to reduce the "lost in hyperspace" syndrome by presenting only relevant information. Adaptive educational hypermedia: Being a subdivision of adaptive hypermedia the main focus of adaptive educational hypermedia lies on education, displaying content and hyperlinks corresponding to the user's knowledge on the field of study. Intelligent tutoring system: Unlike adaptive educational hypermedia systems intelligent tutoring systems are stand-alone systems. Their aim is to help students in a specific field of study. To do so, they build up a user model where they store information about abilities, knowledge and needs of the user. The system can now adapt to this user by presenting approp
Render layers
When creating computer-generated imagery, final scenes appearing in movies and television productions are usually produced by rendering more than one "layer" or "pass," which are multiple images designed to be put together through digital compositing to form a completed frame. Rendering in passes is based on a traditions in motion control photography which predate CGI. As an example, for a visual effects shot, a camera could be programmed to move past a physical model of a spaceship in one pass to film the fully lit beauty pass of the ship, and then to repeat exactly the same camera move passing the ship again to photograph additional elements such as the illuminated windows in the ship or its thrusters. Once all of the passes were filmed, they could then be optically printed together to form a completed shot. The terms render layers and render passes are sometimes used interchangeably. However, rendering in layers refers specifically to separating different objects into separate images, such as a layer each for foreground characters, sets, distant landscape, and sky. On the other hand, rendering in passes refers to separating out different aspects of the scene, such as shadows, highlights, or reflections, into separate images.
OpenAI Five
OpenAI Five is a computer program by OpenAI that plays the five-on-five video game Dota 2. Its first public appearance occurred in 2017, where it was demonstrated in a live one-on-one game against the professional player Dendi, who lost to it. The following year, the system had advanced to the point of performing as a full team of five, and began playing against and showing the capability to defeat professional teams. By choosing a game as complex as Dota 2 to study machine learning, OpenAI thought they could more accurately capture the unpredictability and continuity seen in the real world, thus constructing more general problem-solving systems. The algorithms and code used by OpenAI Five were eventually borrowed by another neural network in development by the company, one which controlled a physical robotic hand. OpenAI Five has been compared to other similar cases of artificial intelligence (AI) playing against and defeating humans, such as AlphaStar in the video game StarCraft II, AlphaGo in the board game Go, Deep Blue in chess, and Watson on the television game show Jeopardy!. == History == Development on the algorithms used for the bots began in November 2016. OpenAI decided to use Dota 2, a competitive five-on-five video game, as a base due to it being popular on the live streaming platform Twitch, having native support for Linux, and had an application programming interface (API) available. Before becoming a team of five, the first public demonstration occurred at The International 2017 in August, the annual premiere championship tournament for the game, where Dendi, a Ukrainian professional player, lost against an OpenAI bot in a live one-on-one matchup. After the match, CTO Greg Brockman explained that the bot had learned by playing against itself for two weeks of real time, and that the learning software was a step in the direction of creating software that can handle complex tasks "like being a surgeon". OpenAI used a methodology called reinforcement learning, as the bots learn over time by playing against itself hundreds of times a day for months, in which they are rewarded for actions such as killing an enemy and destroying towers. By June 2018, the ability of the bots expanded to play together as a full team of five and were able to defeat teams of amateur and semi-professional players. At The International 2018, OpenAI Five played in two games against professional teams, one against the Brazilian-based paiN Gaming and the other against an all-star team of former Chinese players. Although the bots lost both matches, OpenAI still considered it a successful venture, stating that playing against some of the best players in Dota 2 allowed them to analyze and adjust their algorithms for future games. The bots' final public demonstration occurred in April 2019, where they won a best-of-three series against The International 2018 champions OG at a live event in San Francisco. A four-day online event to play against the bots, open to the public, occurred the same month. There, the bots played in 42,729 public games, winning 99.4% of those games. == Architecture == Each OpenAI Five bot is a neural network containing a single layer with a 4096-unit LSTM that observes the current game state extracted from the Dota developer's API. The neural network conducts actions via numerous possible action heads (no human data involved), and every head has meaning. For instance, the number of ticks to delay an action, what action to select – the X or Y coordinate of this action in a grid around the unit. In addition, action heads are computed independently. The AI system observes the world as a list of 20,000 numbers and takes an action by conducting a list of eight enumeration values. Also, it selects different actions and targets to understand how to encode every action and observe the world. OpenAI Five has been developed as a general-purpose reinforcement learning training system on the "Rapid" infrastructure. Rapid consists of two layers: it spins up thousands of machines and helps them 'talk' to each other and a second layer runs software. By 2018, OpenAI Five had played around 180 years worth of games in reinforcement learning running on 256 GPUs and 128,000 CPU cores, using Proximal Policy Optimization, a policy gradient method. == Comparisons with other game AI systems == Prior to OpenAI Five, other AI versus human experiments and systems have been successfully used before, such as Jeopardy! with Watson, chess with Deep Blue, and Go with AlphaGo. In comparison with other games that have used AI systems to play against human players, Dota 2 differs as explained below: Long run view: The bots run at 30 frames per second for an average match time of 45 minutes, which results in 80,000 ticks per game. OpenAI Five observes every fourth frame, generating 20,000 moves. By comparison, chess usually ends before 40 moves, while Go ends before 150 moves. Partially observed state of the game: Players and their allies can only see the map directly around them. The rest of it is covered in a fog of war which hides enemies units and their movements. Thus, playing Dota 2 requires making inferences based on this incomplete data, as well as predicting what their opponent could be doing at the same time. By comparison, Chess and Go are "full-information games", as they do not hide elements from the opposing player. Continuous action space: Each playable character in a Dota 2 game, known as a hero, can take dozens of actions that target either another unit or a position. The OpenAI Five developers allow the space into 170,000 possible actions per hero. Without counting the perpetual aspects of the game, there are an average of ~1,000 valid actions each tick. By comparison, the average number of actions in chess is 35 and 250 in Go. Continuous observation space: Dota 2 is played on a large map with ten heroes, five on each team, along with dozens of buildings and non-player character (NPC) units. The OpenAI system observes the state of a game through developers' bot API, as 20,000 numbers that constitute all information a human is allowed to get access to. A chess board is represented as about 70 lists, whereas a Go board has about 400 enumerations. == Reception == OpenAI Five have received acknowledgement from the AI, tech, and video game community at large. Microsoft founder Bill Gates called it a "big deal", as their victories "required teamwork and collaboration". Chess champion Garry Kasparov, who lost against the Deep Blue AI in 1997, stated that despite their losing performance at The International 2018, the bots would eventually "get there, and sooner than expected". In a conversation with MIT Technology Review, AI experts also considered OpenAI Five system as a significant achievement, as they noted that Dota 2 was an "extremely complicated game", so even beating non-professional players was impressive. PC Gamer wrote that their wins against professional players was a significant event in machine learning. In contrast, Motherboard wrote that the victory was "basically cheating" due to the simplified hero pools on both sides, as well as the fact that bots were given direct access to the API, as opposed to using computer vision to interpret pixels on the screen. The Verge wrote that the bots were evidence that the company's approach to reinforcement learning and its general philosophy about AI was "yielding milestones". In 2019, DeepMind unveiled a similar bot for StarCraft II, AlphaStar. Like OpenAI Five, AlphaStar used reinforcement learning and self-play. The Verge reported that "the goal with this type of AI research is not just to crush humans in various games just to prove it can be done. Instead, it's to prove that — with enough time, effort, and resources — sophisticated AI software can best humans at virtually any competitive cognitive challenge, be it a board game or a modern video game." They added that the DeepMind and OpenAI victories were also a testament to the power of certain uses of reinforcement learning. It was OpenAI's hope that the technology could have applications outside of the digital realm. In 2018, they were able to reuse the same reinforcement learning algorithms and training code from OpenAI Five for Dactyl, a human-like robot hand with a neural network built to manipulate physical objects. In 2019, Dactyl solved the Rubik's Cube.